Worx Landroid WG795E.1 Lawn Mower Manual

The Worx Landroid WG795E.1 is an innovative robotic lawn mower designed to maintain your lawn effortlessly. With advanced navigation technology, it can handle lawns up to 800 square meters, cutting grass efficiently while avoiding obstacles. It features a weather-resistant design, programmable cutting schedules, and a user-friendly interface. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, and remote control.

Feature	Description
Robotic Mower	Autonomously mows your lawn with precision.
Charging Station	Automatically returns to charge when needed.
Boundary Wire	Defines the mowing area to prevent off-limits mowing.
Remote Control	Allows manual operation and programming.
Weather Resistance	Designed to operate in various weather conditions.
Programmable Schedule	Set specific days and times for mowing.
Obstacle Detection	Automatically avoids obstacles in its path.
Height Adjustment	Adjustable cutting height for different grass types.

Installation

Unpack the mower and accessories. Follow these steps for installation:

Set up the charging station in a dry, flat area.
Lay the boundary wire around the perimeter of the lawn.
Connect the boundary wire to the charging station.
Ensure the mower is charged before first use.

WARNING! Ensure the area is clear of obstacles before operation.

First-Time Setup

Power on the mower and follow the on-screen prompts to set up.

Set the current date and time.
Program the mowing schedule according to your preferences.
Adjust the cutting height based on grass type.
Test the boundary wire to ensure proper operation.

CAUTION! Keep children and pets away during setup.

Specifications

Cutting Width: 20 cm.
Battery Type: Lithium-ion.
Charging Time: Approximately 90 minutes.
Operating Time: Up to 60 minutes on a full charge.
Weight: 9 kg.
Noise Level: 60 dB.
Cutting Height: Adjustable from 20 mm to 60 mm.
Max Lawn Area: 800 m².

Controls and Settings

Access settings via the user interface on the mower. Key controls include:

Power Button: Turns the mower on/off.

Menu Button: Accesses settings and schedules.

Height Adjustment: Adjusts the cutting height.

Connecting Devices

Connect the mower to your smartphone via the app for additional features.

Download the Worx Landroid app from your app store.
Follow the app instructions to connect to the mower.
Access additional settings and monitoring features through the app.

Tip: Ensure your smartphone is connected to Wi-Fi for optimal performance.

Operating the Mower

To operate the mower, ensure it is charged and the boundary wire is set up correctly.

Press the power button to turn on the mower.
Set the desired mowing schedule through the interface.
Monitor the mower's operation via the app if connected.

WARNING! Do not attempt to operate the mower in heavy rain or storms.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the mower after each use to remove grass clippings.
Check the blades regularly for wear and replace if necessary.
Ensure the charging station is clean and free of debris.

CAUTION! Always turn off the mower before performing maintenance.

Safety Information

Read all safety instructions before operating the mower.

Keep children and pets away from the mowing area.
Do not operate the mower in wet conditions.
Ensure the boundary wire is properly installed to avoid accidents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery low	Charge the battery fully.
Mower stops mid-operation	Obstacle detected	Remove obstacles from the mowing area.
Uneven cutting	Blades dull	Sharpen or replace the blades.
Boundary wire issues	Wire damaged	Inspect and repair the boundary wire.

Reset: Refer to the user manual for reset instructions.

Service: For support, contact Worx customer service.