Worx M800-WG790E Lawn Mower Manual

The Worx M800-WG790E is a powerful and efficient lawn mower designed for easy operation and maintenance. It features a 40V lithium battery for cordless convenience, a 20-inch cutting deck, and adjustable cutting heights to suit various grass types. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 40V lithium battery, 20-inch cutting deck, adjustable cutting heights, ergonomic handle, and lightweight design for easy maneuverability.

Feature	Description
40V Lithium Battery	Provides cordless operation with long-lasting power.
20-inch Cutting Deck	Wide cutting area for efficient mowing.
Adjustable Cutting Heights	Allows customization of grass length.
Ergonomic Handle	Designed for comfort and ease of use.
Lightweight Design	Easy to maneuver and transport.

Installation

Unpack and inspect contents. Ensure all parts are included.

Charge the battery fully before first use.
Attach the handle according to the instructions provided.
Ensure the cutting deck is securely attached.
Check all safety features before operating.

WARNING! Always wear appropriate safety gear when operating the mower.

First-Time Setup

Power on the mower; follow the setup instructions.

Insert the battery into the mower.
Adjust the handle height for comfort.
Set the desired cutting height using the adjustment lever.
Perform a test run in a safe area.

CAUTION! Ensure the area is clear of obstacles before mowing.

Specifications

Battery: 40V Lithium-ion.
Cutting Width: 20 inches.
Cutting Heights: Adjustable from 1 inch to 3 inches.
Weight: Approximately 40 lbs.
Runtime: Up to 60 minutes on a full charge.
Charging Time: 2 hours.
Safety Features: Safety key, blade brake.

Controls and Settings

Access controls via the handle. Key features include power switch, cutting height adjustment lever, and safety key.

Power Switch: Turns the mower on and off.

Cutting Height Adjustment: Allows for easy changes to grass length.

Connecting Devices

Battery: Ensure the battery is properly connected before use.

Check battery charge level before mowing.
Ensure all connections are secure.

Tip: Always store the battery in a cool, dry place when not in use.

Operating the Mower

Follow these steps for safe operation:

Start the mower by turning the power switch on.
Push the mower forward at a steady pace.
Adjust cutting height as needed during operation.
Turn off the mower when finished and remove the battery.

WARNING! Do not operate on wet grass or slopes.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the cutting deck after each use.
Check battery connections regularly.
Sharpen blades as needed.
Store in a dry place during off-season.

Safety Information

Read all safety instructions before operating the mower.

Wear safety goggles and gloves.
Keep children and pets away from the mowing area.
Do not operate in wet conditions.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower won't start	Battery not charged	Charge the battery fully.
Uneven cutting	Blades dull	Sharpen or replace blades.
Battery drains quickly	Old battery	Replace with a new battery.
Strange noises	Debris in blades	Inspect and clean the cutting deck.

Reset: If issues persist, consult customer support.

Service: For assistance, contact Worx customer service.