Worx S Basic LANDROID Lawn Mower Manual

The Worx S Basic LANDROID is an innovative robotic lawn mower designed to maintain your lawn effortlessly. With advanced navigation technology, it can handle complex lawns with ease, cutting grass efficiently while avoiding obstacles. The mower features a weather-resistant design, programmable cutting schedules, and a user-friendly interface. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, and user manual.

Feature	Description
Smart Navigation	Efficiently navigates around obstacles and complex areas.
Weather Resistant	Designed to operate in various weather conditions.
Programmable Schedule	Set cutting times according to your preference.
Boundary Wire	Defines the mowing area to keep the mower within limits.
Remote Control	Control the mower from your smartphone or remote.

Installation

Unpack and inspect contents. Set up the charging station in a suitable location.

Install boundary wire: Lay out the wire around the mowing area.
Connect charging station: Plug into a power source and ensure proper placement.
Test the mower: Ensure it can navigate the defined area without issues.

WARNING! Ensure the area is clear of obstacles before operation.

First-Time Setup

Power on the mower and follow the on-screen prompts.

Set the cutting height: Adjust according to your lawn's needs.
Program the mowing schedule: Use the interface to set preferred times.
Test the mower's operation: Observe its navigation and cutting performance.

CAUTION! Ensure the mower is on a flat surface during setup.

Specifications

Cutting Width: 18 cm.
Battery Type: Lithium-ion.
Charging Time: Approximately 90 minutes.
Operating Time: Up to 60 minutes on a full charge.
Weight: 7 kg.
Noise Level: 60 dB.
Cutting Height: Adjustable from 20 mm to 60 mm.

Controls and Settings

Access settings via the onboard display or mobile app. Key controls include power, schedule, and cutting height adjustments.

Remote: Use the app for remote control and monitoring.

Connecting Devices

Connect the mower to your home Wi-Fi for remote access.

Download the Worx app on your smartphone.
Follow the app instructions to connect the mower.
Ensure the mower is within range of your Wi-Fi signal.

Tip: Keep the app updated for optimal performance.

Operating the Mower

Start the mower using the onboard controls or the app.

Press the power button to turn on.
Set the desired cutting schedule.
Monitor the mower's progress through the app.

WARNING! Do not approach the mower while it is in operation.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the blades after each use.
Check battery health periodically.
Inspect the boundary wire for damage.

CAUTION! Always turn off the mower before performing maintenance.

Safety Information

Read all safety instructions before operating the mower. Keep children and pets away from the mowing area.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery issue	Check battery charge and connections.
Uneven cutting	Blade dullness	Sharpen or replace blades as needed.
Boundary wire issues	Wire damage	Inspect and repair boundary wire.
Mower gets stuck	Obstacles in the way	Clear the area of any obstacles.

Reset: Follow the app instructions for resetting the mower if necessary.

Service: For support, contact Worx customer service.