Worx WG713E Lawn Mower Manual

The Worx WG713E is a powerful and efficient lawn mower designed for easy and effective grass cutting. It features a 40V battery system, a 20-inch cutting deck, and a lightweight design for easy maneuverability. The mower is equipped with a 3-in-1 cutting system that allows for mulching, bagging, and side discharge. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 20-inch cutting deck, 40V battery, adjustable cutting height, lightweight design, and ergonomic handle.

FeatureDescription
20-inch Cutting DeckProvides a wide cutting path for efficient mowing.
40V BatteryPowerful battery system for extended run time.
Adjustable Cutting HeightAllows for customization of grass length.
Lightweight DesignEasy to maneuver and transport.
3-in-1 Cutting SystemMulching, bagging, and side discharge options.

Installation

Unpack and inspect contents. Ensure all parts are included.

  1. Assemble the handle: Attach the handle to the mower body using the provided screws.
  2. Install the battery: Insert the fully charged battery into the mower.
  3. Check the cutting height: Adjust the cutting height lever to your desired setting.
  4. Plug in the charger: Ensure the battery is charged before first use.

WARNING! Always wear appropriate safety gear when operating the mower.

First-Time Setup

Power on the mower; ensure the battery is fully charged.

  1. Check the battery level: Ensure the battery is charged before use.
  2. Adjust the handle: Set the handle to a comfortable height for operation.
  3. Test the mower: Start the mower and check for proper operation.

CAUTION! Ensure the area is clear of obstacles before mowing.

Specifications

Controls and Settings

Access the controls via the handle. The mower features a safety switch, throttle control, and height adjustment lever.

Safety Switch: Prevents accidental start; must be engaged to operate.

Throttle Control: Adjusts the speed of the mower.

Height Adjustment Lever: Allows for quick changes to cutting height.

Connecting Devices

Battery: Ensure the battery is properly connected before use.

  1. Turn off the mower before connecting or disconnecting the battery.
  2. Ensure the battery is fully charged before operation.

Tip: Always store the battery in a cool, dry place.

Operating the Mower

Follow these steps for effective mowing:

  1. Start the mower: Engage the safety switch and pull the throttle control.
  2. Mow the lawn: Move the mower in straight lines for even cutting.
  3. Adjust speed as needed: Use the throttle control for speed adjustments.
  4. Stop the mower: Release the throttle control to stop the blades.

WARNING! Do not operate the mower on wet grass.

Maintenance

Regular maintenance is essential for optimal performance.

  1. Clean the mower after each use: Remove grass clippings and debris.
  2. Check the battery: Ensure it is charged and in good condition.
  3. Inspect the blades: Sharpen or replace blades as needed.

CAUTION! Always disconnect the battery before performing maintenance.

Safety Information

Read all safety instructions before operating the mower. Always wear safety goggles and gloves.

WARNING! Keep hands and feet away from the cutting area.

Troubleshooting

SymptomPossible CauseCorrective Action
Mower won't startBattery deadCharge the battery and try again.
Uneven cuttingBlades dullSharpen or replace blades.
Battery not chargingFaulty chargerCheck charger and replace if necessary.
Excessive vibrationLoose partsTighten all screws and bolts.

Reset: If issues persist, consult the manual or contact support.

Service: For assistance, contact Worx customer service.

Worx WG713E Lawn Mower Manual © - All Rights Reserved 2026