Worx WG718 Lawn Mower Manual

The Worx WG718 is a 14-inch electric lawn mower designed for efficient grass cutting with a powerful motor, adjustable cutting heights, and a lightweight design for easy maneuverability. It features a 10-amp motor, a 2-in-1 cutting system for mulching and bagging, and a collapsible handle for compact storage. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 14-inch cutting deck, adjustable cutting height, 2-in-1 mulching and bagging capability, lightweight design, and collapsible handle.

Feature	Description
14-inch Cutting Deck	Efficiently cuts grass in tight spaces
10-Amp Motor	Powerful enough for tough grass
Adjustable Cutting Heights	Allows for customization of grass length
2-in-1 Functionality	Mulches or bags clippings for easy disposal
Collapsible Handle	For easy storage and transport

Installation

Unpack the mower and check for all components. Assemble the handle and ensure all screws are tightened.

Attach the handle: Align and secure with screws provided.
Check the power cord: Ensure it is free from damage.
Set the cutting height: Adjust to desired level before use.

WARNING! Always ensure the mower is unplugged during assembly.

First-Time Setup

Before using the mower, ensure it is properly assembled and the cutting height is set.

Plug in the mower: Ensure the power outlet is suitable for the mower.
Test the safety features: Ensure the safety switch works before starting.
Familiarize with controls: Review the operation manual for control functions.

CAUTION! Always wear appropriate safety gear when operating the mower.

Specifications

Cutting Width: 14 inches.
Motor Power: 10 amps.
Cutting Heights: Adjustable from 1 inch to 3 inches.
Weight: Approximately 30 lbs.
Power Source: Electric corded.
Deck Material: Durable plastic.
Noise Level: 85 dB.

Controls and Settings

The mower features a simple control panel with an on/off switch, safety switch, and height adjustment lever.

Safety Switch: Must be engaged to operate the mower.

Height Adjustment Lever: Allows for easy changes to cutting height.

Connecting Power

Ensure the mower is connected to a suitable power outlet. Use an extension cord if necessary, ensuring it is rated for outdoor use.

Check the power cord for damage before use.
Plug the mower into a grounded outlet.
Do not use with a damaged cord.

Tip: Always use a GFCI outlet for safety.

Operating the Mower

To operate the mower, engage the safety switch and pull the start lever.

Start the mower: Engage the safety switch and pull the lever.
Adjust speed if applicable: Some models may have speed settings.
Cut grass: Move the mower in straight lines for best results.

WARNING! Do not operate on wet grass to avoid slipping.

Maintenance

Regular maintenance is essential for optimal performance. Clean the mower after each use and check for wear.

Clean the cutting deck: Remove grass clippings and debris.
Check the blades: Ensure they are sharp and free from damage.
Inspect the power cord: Look for any signs of wear or damage.

CAUTION! Always unplug the mower before performing maintenance.

Safety Information

Read all safety instructions before operating the mower. Always wear protective gear and keep bystanders away.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower won't start	Power cord issue	Check power connection and cord for damage.
Uneven cutting	Blades dull	Sharpen or replace blades as necessary.
Excessive vibration	Loose parts	Tighten all screws and check for loose components.
Grass clippings not bagging	Clogged chute	Clear any obstructions in the discharge chute.

Reset: If issues persist, consult the manual or contact support.

Service: For assistance, contact Worx customer service.