Worx WG734E Lawn Mower Manual

The Worx WG734E is a powerful 40V cordless lawn mower designed for efficient grass cutting with a 34 cm cutting width. It features a brushless motor for enhanced performance, a 5-position cutting height adjustment, and a lightweight design for easy maneuverability. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 40V battery, brushless motor, adjustable cutting height, lightweight design, and foldable handle for easy storage.

Feature	Description
Brushless Motor	Provides longer runtime and less maintenance.
5-Position Cutting Height	Adjustable from 20mm to 70mm for different grass lengths.
34 cm Cutting Width	Ideal for small to medium-sized lawns.
Lightweight Design	Easy to maneuver and transport.
Foldable Handle	For compact storage and easy transport.

Installation

Unpack the mower and ensure all parts are included. Charge the battery fully before first use.

Attach the handle: Align and secure the handle to the mower body.
Install the battery: Insert the fully charged battery into the mower.
Check safety features: Ensure all safety guards are in place.

WARNING! Always wear appropriate safety gear when operating the mower.

First-Time Setup

Power on the mower and familiarize yourself with the controls.

Adjust the cutting height: Use the lever to set your desired height.
Check battery level: Ensure the battery is charged before use.
Perform a test run: Start the mower and test its operation.

CAUTION! Ensure the area is clear of obstacles before mowing.

Specifications

Power Source: 40V Lithium-Ion battery.
Cutting Width: 34 cm.
Cutting Height: Adjustable from 20mm to 70mm.
Weight: Approximately 15 kg.
Runtime: Up to 30 minutes on a full charge.
Charging Time: 90 minutes.

Controls and Settings

Access controls via the handle: Power button, cutting height adjustment lever, and safety switch.

Safety Features: Safety switch must be engaged to start the mower.

Connecting Devices

This mower does not require external connections; it operates independently with its battery.

Operating the Mower

Follow these steps to operate the mower effectively.

Power on the mower: Press the power button.
Adjust the cutting height as needed.
Begin mowing: Move the mower forward at a steady pace.
Stop the mower: Release the safety switch to stop the blades.

WARNING! Do not operate on wet grass.

Maintenance

Regular maintenance will ensure optimal performance.

Clean the mower after each use: Remove grass clippings and debris.
Check the battery: Ensure it is charged and stored properly.
Inspect blades: Sharpen or replace as necessary.

CAUTION! Always disconnect the battery before performing maintenance.

Safety Information

Read all safety instructions before operating the mower.

Wear safety goggles and gloves.
Keep children and pets away from the mowing area.
Do not operate in wet conditions.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower won't start	Battery not charged	Charge the battery fully before use.
Uneven cutting	Incorrect cutting height	Adjust the cutting height for even results.
Grass clippings not collected	Clogged mower deck	Clean the mower deck to ensure proper function.
Battery drains quickly	Old battery	Replace the battery if it no longer holds a charge.

Reset: If issues persist, consult customer support.

Service: For assistance, contact Worx customer service.