Worx WG761E Lawn Mower Manual

The Worx WG761E is a powerful and efficient cordless lawn mower designed for easy operation and maintenance. It features a 40V battery system, a 20-inch cutting deck, and a lightweight design that makes mowing your lawn a breeze. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 40V battery system, 20-inch cutting deck, adjustable cutting height, lightweight design, and foldable handle for easy storage.

Feature	Description
40V Battery	Provides powerful and long-lasting performance
20-inch Cutting Deck	Wide cutting area for efficient mowing
Adjustable Cutting Height	Allows customization of grass length
Lightweight Design	Easy to maneuver and transport
Foldable Handle	Saves space during storage

Installation

Unpack the mower and inspect all components. Ensure the battery is fully charged before first use.

Attach the handle: Align and secure the handle to the mower body.
Insert the battery: Ensure it clicks into place securely.
Check for safety features: Ensure all safety guards are in place.

WARNING! Always wear appropriate safety gear when operating the mower.

First-Time Setup

Power on the mower; follow the instructions on the display.

Charge the battery: Connect the charger and wait for the indicator light to turn green.
Set the cutting height: Adjust the lever to your desired height.
Test the mower: Start the mower in a safe area to ensure proper operation.

CAUTION! Ensure the area is clear of obstacles before mowing.

Specifications

Battery: 40V Lithium-Ion.
Cutting Width: 20 inches.
Cutting Height: Adjustable from 1 inch to 3 inches.
Weight: 33 lbs.
Run Time: Up to 45 minutes on a full charge.
Charging Time: Approximately 2 hours.

Controls and Settings

Access the control panel for power, speed settings, and cutting height adjustment.

Buttons: Power, Start/Stop, Cutting Height Adjustment.

Ensure to familiarize yourself with the controls before operating the mower.

Connecting Devices

No external devices are required for operation. Ensure the battery is properly connected.

Operating the Mower

Follow these steps for safe and effective mowing.

Power on the mower: Press the power button.
Start mowing: Move the mower forward at a steady pace.
Adjust speed as necessary: Use the speed control for optimal performance.
Turn off the mower: Press the power button when finished.

WARNING! Do not operate on wet grass or slopes greater than 15 degrees.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the mower after each use: Remove grass clippings and debris.
Check battery health: Ensure connections are clean and secure.
Inspect blades: Sharpen or replace as needed.

CAUTION! Always disconnect the battery before performing maintenance.

Safety Information

Read all safety instructions before operating the mower.

Wear safety glasses and gloves.
Keep children and pets away from the mowing area.
Do not operate in wet conditions.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower won't start	Battery not charged	Charge the battery fully before use.
Uneven cutting	Blades dull	Sharpen or replace blades as necessary.
Battery drains quickly	Old battery	Replace battery if it no longer holds a charge.
Strange noises	Debris caught in blades	Turn off and inspect for blockages.

Service: For further assistance, contact customer support.