Worx WG770E.1 Lawn Mower Manual

The Worx WG770E.1 is a cordless lawn mower designed for efficient and eco-friendly grass cutting. It features a powerful battery system, adjustable cutting heights, and a lightweight design for easy maneuverability. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance and Care 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Cordless design, adjustable cutting height, lightweight frame, and ergonomic handle.

Feature	Description
Battery Powered	Provides cordless convenience and eliminates emissions.
Adjustable Cutting Height	Allows customization of grass length from 20mm to 60mm.
Lightweight Design	Easy to maneuver and transport.
Ergonomic Handle	Designed for comfort during operation.
Grass Collection Bag	Collects clippings for easy disposal.

Installation

Unpack and inspect contents. Ensure all parts are included.

Charge the battery fully before first use.
Attach the handle to the mower body.
Ensure the grass collection bag is securely attached.
Check that all safety features are functioning.

WARNING! Always wear appropriate safety gear when operating the mower.

First-Time Setup

Power on the mower and follow the setup instructions.

Insert the battery into the mower.
Adjust the cutting height to your preference.
Perform a test run in a small area.

CAUTION! Ensure the area is clear of obstacles before mowing.

Specifications

Power Source: 40V Lithium-Ion battery.
Cutting Width: 34 cm.
Cutting Height: Adjustable from 20mm to 60mm.
Weight: 12 kg.
Grass Collection Bag Capacity: 30 liters.
Charging Time: Approximately 2 hours.
Run Time: Up to 30 minutes on a full charge.

Controls and Settings

Access controls via the handle. Features include power switch, cutting height adjustment lever, and safety button.

Safety Features: Safety button must be pressed to start the mower.

Connecting Devices

Ensure the battery is charged before connecting any accessories.

Check compatibility of accessories with the mower.
Follow the manufacturer's instructions for any attachments.

Tip: Always disconnect the battery when not in use.

Operating the Mower

Follow these steps for effective mowing:

Power on the mower using the safety button.
Adjust the cutting height as needed.
Begin mowing in a straight line, overlapping each pass.
Empty the grass collection bag as needed.

WARNING! Do not operate the mower in wet conditions.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the mower after each use.
Check the battery for damage and keep contacts clean.
Sharpen the blades as needed.

Safety Information

Read all safety instructions before operating the mower.

Keep hands and feet away from the cutting area.
Do not operate the mower if you are tired or under the influence.
Wear appropriate footwear and eye protection.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower won't start	Battery not charged	Charge the battery fully before use.
Uneven cutting	Incorrect cutting height	Adjust the cutting height to the desired level.
Grass clippings not collected	Bag full	Empty the grass collection bag.
Overheating	Continuous use	Allow the mower to cool down before resuming.

Service: For support, contact Worx customer service.