Worx WG770E.9 Lawn Mower Manual

The Worx WG770E.9 is a cordless lawn mower designed for efficient grass cutting with a 40V battery system. It features a 34 cm cutting deck, adjustable cutting heights, and a lightweight design for easy maneuverability. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Cordless design, 40V battery, adjustable cutting height, lightweight frame, and grass collection bag.

Feature	Description
40V Battery	Provides cordless operation for up to 30 minutes of runtime.
34 cm Cutting Deck	Compact size for easy maneuvering in tight spaces.
Adjustable Cutting Heights	Allows for customization of grass length with multiple height settings.
Grass Collection Bag	Collects clippings for a clean finish.
Lightweight Design	Easy to push and maneuver around the yard.

Installation

Unpack and inspect the mower. Ensure all components are included.

Charge the battery fully before first use.
Attach the handle to the mower body as per the instructions.
Ensure the grass collection bag is securely attached.
Check that the cutting height is set to your desired level.

WARNING! Always wear appropriate safety gear when operating the mower.

First-Time Setup

Power on the mower; ensure the battery is installed correctly.

Press the safety switch and pull the start lever to begin operation.
Adjust the cutting height as needed before mowing.
Familiarize yourself with the controls and features.

CAUTION! Ensure the area is clear of obstacles before mowing.

Specifications

Power Source: 40V Lithium-Ion battery.
Cutting Width: 34 cm.
Cutting Heights: 3 positions (20mm to 60mm).
Weight: Approximately 12 kg.
Runtime: Up to 30 minutes on a full charge.
Grass Collection Bag Capacity: 30 liters.
Charging Time: 1 hour.

Controls and Settings

Access the power switch and cutting height adjustment lever on the mower handle.

Safety Features: Safety switch prevents accidental start; ensure it is engaged before starting.

Connecting Devices

No external devices are required for operation.

Ensure the battery is charged and installed correctly.
Check that all components are securely attached.

Tip: Always store the mower in a dry place to prolong battery life.

Operating the Mower

Follow these steps for safe and effective mowing.

Power on the mower and adjust the cutting height.
Begin mowing in straight lines for an even cut.
Empty the grass collection bag as needed during operation.

WARNING! Do not operate the mower in wet conditions.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the mower after each use to prevent grass buildup.
Check and replace the battery as needed.
Inspect the blades for wear and sharpen or replace as necessary.

CAUTION! Always disconnect the battery before performing maintenance.

Safety Information

Read all safety instructions before operating the mower.

Keep children and pets away from the mowing area.
Wear appropriate footwear and eye protection.
Do not operate the mower if you are tired or under the influence of drugs or alcohol.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery not charged	Charge the battery fully before use.
Uneven cut	Incorrect cutting height	Adjust the cutting height for even results.
Grass clippings not collected	Bag full	Empty the grass collection bag.
Battery drains quickly	Old battery	Replace the battery if it no longer holds a charge.

Service: For support, contact Worx customer service.