Worx WG782 Lawn Mower Manual

The Worx WG782 is a 14-inch cordless electric lawn mower designed for efficient grass cutting. It features a powerful 40V battery, a lightweight design for easy maneuverability, and a compact size for storage. The mower includes a 3-in-1 function for mulching, bagging, and side discharge, making it versatile for various lawn care needs. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 40V battery, 14-inch cutting deck, adjustable cutting height, lightweight design, and 3-in-1 functionality.

FeatureDescription
40V BatteryProvides cordless operation for up to 30 minutes of runtime.
14-inch Cutting DeckCompact size for easy maneuverability in tight spaces.
Adjustable Cutting HeightAllows for customization of grass length with 6 height settings.
3-in-1 FunctionalityMulches, bags, or side discharges grass clippings.
Lightweight DesignEasy to push and transport.

Installation

Unpack the mower and ensure all components are included. Charge the battery fully before first use.

  1. Attach the handle: Align and secure the handle to the mower body.
  2. Install the grass bag: Attach the grass collection bag to the rear of the mower.
  3. Charge the battery: Connect the battery to the charger until fully charged.

WARNING! Always wear protective gear when operating the mower.

First-Time Setup

Ensure the battery is charged and the mower is assembled correctly.

  1. Set the desired cutting height using the adjustment lever.
  2. Ensure the grass bag is securely attached.
  3. Power on the mower using the safety switch and start button.

CAUTION! Keep hands and feet away from the cutting deck while operating.

Specifications

Controls and Settings

The mower features a safety switch and a start button for operation. The cutting height adjustment lever is located on the side of the mower.

Battery Indicator: Displays battery level during operation.

Connecting Devices

Ensure the battery is charged before connecting to the mower. No additional devices are required for operation.

Operating the Mower

To operate the mower, follow these steps:

  1. Power on the mower using the safety switch and start button.
  2. Push the mower forward to begin cutting.
  3. Adjust the cutting height as needed during operation.
  4. Empty the grass bag when full.

WARNING! Do not operate on wet grass or slopes greater than 15 degrees.

Maintenance

Regular maintenance is essential for optimal performance.

  1. Clean the cutting deck after each use.
  2. Check and tighten all screws and bolts regularly.
  3. Store the mower in a dry place when not in use.

CAUTION! Always disconnect the battery before performing maintenance.

Safety Information

Read all safety instructions before operating the mower. Keep children and pets away from the mowing area.

Troubleshooting

SymptomPossible CauseCorrective Action
Mower does not startBattery not chargedCharge the battery fully before use.
Uneven cuttingIncorrect cutting heightAdjust the cutting height for even results.
Grass bag not collectingClogged bag or chuteEmpty the bag and clean the chute.
Battery drains quicklyOld or damaged batteryReplace the battery if performance is poor.

Service: For support, contact Worx customer service.

Worx WG782 Lawn Mower Manual © - All Rights Reserved 2026