Worx WR167E Lawn Mower Manual

The Worx WR167E is a powerful and efficient lawn mower designed for easy maneuverability and effective grass cutting. This cordless mower features a 40V battery system, a 17-inch cutting deck, and a lightweight design, making it ideal for small to medium-sized lawns. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 40V battery, 17-inch cutting deck, adjustable cutting height, lightweight design, and ergonomic handle.

Feature	Description
40V Battery	Provides cordless operation for maximum convenience.
17-inch Cutting Deck	Efficiently cuts grass in a single pass.
Adjustable Cutting Height	Allows customization of grass length.
Lightweight Design	Easy to maneuver and transport.
Ergonomic Handle	Provides comfort during operation.

Installation

Unpack the mower and ensure all parts are included. Charge the battery fully before first use.

Attach the handle: Align and secure the handle to the mower body.
Insert the battery: Ensure it clicks into place.
Check safety features: Ensure all safety guards are in place.

WARNING! Always read the manual before use to ensure safety.

First-Time Setup

Power on the mower and follow the instructions for initial settings.

Set cutting height: Adjust the lever to your desired height.
Charge the battery: Ensure the battery is fully charged before use.
Perform a test run: Start the mower in an open area to familiarize yourself with controls.

CAUTION! Ensure the area is clear of obstacles before mowing.

Specifications

Battery: 40V Lithium-Ion.
Cutting Width: 17 inches.
Cutting Height: Adjustable from 1 to 3 inches.
Weight: Approximately 30 lbs.
Runtime: Up to 40 minutes on a full charge.
Charging Time: 2 hours.
Deck Material: Durable plastic.

Controls and Settings

Access controls via the handle: Power button, cutting height adjustment lever, and safety switch.

Power Button: Starts and stops the mower.

Cutting Height Adjustment: Allows you to set the desired grass length.

Connecting Devices

This mower does not require any external devices for operation.

Operating the Mower

Follow these steps for safe and effective mowing:

Ensure the battery is charged and inserted.
Press the power button to start.
Adjust the cutting height as needed.
Guide the mower slowly across the lawn.

WARNING! Keep hands and feet away from the cutting area.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the mower after each use.
Check the battery regularly for wear.
Sharpen the blades at least once a season.

Safety Information

Always follow safety precautions when operating the mower.

Wear appropriate footwear and eye protection.
Do not operate in wet conditions.
Keep children and pets away from the mowing area.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower won't start	Battery not charged	Charge the battery fully before use.
Uneven cut	Blades dull	Sharpen or replace blades as needed.
Battery drains quickly	Old battery	Replace battery if it no longer holds a charge.
Handle feels loose	Improper assembly	Check and tighten all handle screws.

Reset: If issues persist, consult customer support.

Service: For assistance, contact Worx customer service.