Worx WR308E Lawn Mower Manual

The Worx WR308E is a powerful and efficient lawn mower designed for easy and effective grass cutting. It features a 40V lithium battery for cordless operation, a 30cm cutting width, and adjustable cutting heights to suit various grass types. The mower is lightweight, easy to maneuver, and equipped with a grass collection bag for convenient disposal. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 40V lithium battery, adjustable cutting height, grass collection bag, lightweight design, and ergonomic handle.

FeatureDescription
40V Lithium BatteryProvides cordless operation with long runtime
Adjustable Cutting HeightAllows customization of grass length
Grass Collection BagCollects grass clippings for easy disposal
Lightweight DesignEasy to maneuver and transport
Ergonomic HandleProvides comfort during operation

Installation

Unpack the mower and check all components. Ensure the battery is fully charged before use.

  1. Attach the handle: Align and secure the handle to the mower body.
  2. Install the grass collection bag: Ensure it is properly fitted.
  3. Charge the battery: Connect the charger and wait for the indicator light to show full charge.

WARNING! Always wear protective gear when operating the mower.

First-Time Setup

Power on the mower and adjust the cutting height according to your preference.

  1. Check battery status: Ensure the battery is charged.
  2. Set cutting height: Use the lever to adjust to desired height.
  3. Perform a test run: Start the mower and check for proper operation.

CAUTION! Ensure the area is clear of obstacles before mowing.

Specifications

Controls and Settings

The mower features a simple control panel for easy operation. The main controls include the power button, cutting height adjustment lever, and battery indicator.

Connecting Devices

This section is not applicable for the lawn mower.

Operating the Mower

To operate the mower, ensure the battery is charged and the area is clear of debris.

  1. Power on the mower using the main switch.
  2. Adjust the cutting height as needed.
  3. Begin mowing by pushing the mower forward.
  4. Empty the grass collection bag when full.

WARNING! Do not operate the mower in wet conditions.

Maintenance

Regular maintenance is essential for optimal performance.

  1. Clean the mower after each use.
  2. Check the battery for wear and replace if necessary.
  3. Sharpen the blades periodically for a clean cut.

Safety Information

Always follow safety guidelines when operating the mower.

Troubleshooting

SymptomPossible CauseCorrective Action
Mower does not startBattery not chargedCharge the battery fully before use.
Uneven cutBlades dullSharpen or replace blades as needed.
Grass clippings not collectedBag fullEmpty the grass collection bag.
Battery drains quicklyOld batteryReplace the battery if it no longer holds charge.

Service: For support, contact Worx customer service.

Worx WR308E Lawn Mower Manual © - All Rights Reserved 2026