Worx Landroid WG794 Lawn Mower Manual

The Worx Landroid WG794 is an innovative robotic lawn mower designed to maintain your lawn effortlessly. With advanced navigation technology, it can handle lawns up to 1/4 acre and features a cutting width of 7 inches. The mower is equipped with a rain sensor, adjustable cutting height, and a user-friendly interface. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, rain sensor, adjustable cutting height, user interface.

FeatureDescription
Robotic MowerAutomated mowing for hassle-free lawn care
Charging StationAutomatically returns to charge when needed
Rain SensorPauses mowing during rain to protect the mower
Adjustable Cutting HeightCustomizable height settings for different grass types
User InterfaceSimple controls for easy programming and operation

Installation

Unpack and inspect contents. Set up the charging station in a suitable location.

  1. Choose a location for the charging station: Ensure it's near a power outlet and has a clear path.
  2. Install boundary wire: Outline the area to be mowed, ensuring the wire is securely placed.
  3. Connect the charging station to power: Plug it into an outlet and ensure it is functioning.
  4. Place the mower on the charging station to charge before first use.

WARNING! Ensure the area is clear of obstacles before operation.

First-Time Setup

Power on the mower and follow the on-screen prompts.

  1. Set the mowing schedule: Use the user interface to program preferred mowing times.
  2. Adjust cutting height: Select the desired height for your lawn type.
  3. Test the mower: Allow it to run a complete cycle to ensure proper operation.

CAUTION! Ensure the boundary wire is correctly installed before operation.

Specifications

Controls and Settings

Access settings via the user interface. Key controls include power, schedule, and cutting height adjustments.

Remote Control: Optional remote for manual operation and adjustments.

Connecting Devices

Ensure the mower is connected to the charging station and boundary wire is properly installed.

  1. Turn off the mower before making any connections.
  2. Ensure all connections are secure and free from damage.

Tip: Regularly check connections for wear and tear.

Operating the Mower

Follow the programmed schedule for automatic mowing.

  1. Press the power button to start the mower.
  2. Monitor the mower during its first operation to ensure it follows the boundary wire correctly.
  3. Adjust settings as needed for optimal performance.

WARNING! Keep pets and children away from the mower during operation.

Maintenance

Regular maintenance is essential for optimal performance.

  1. Clean the mower after each use to remove grass clippings.
  2. Check the blades regularly for wear and replace as necessary.
  3. Inspect the boundary wire for damage and repair if needed.

Safety Information

Read all safety instructions before operating the mower. Keep the area clear of obstacles and supervise children and pets.

Regulatory Information

This device complies with FCC Part 15. For support, visit www.worx.com or contact customer service.

Troubleshooting

SymptomPossible CauseCorrective Action
Mower does not startBattery issueCheck battery charge and connections.
Mower stops unexpectedlyBoundary wire issueInspect boundary wire for breaks or disconnections.
Uneven cuttingBlade wearCheck and replace blades if necessary.
Mower does not return to charging stationObstacles in the wayClear any obstacles blocking the path.

Reset: Refer to the user interface for reset options if available.

Service: For assistance, contact customer support at 1-800-555-0199 or visit www.worx.com.

Worx Landroid WG794 Lawn Mower Manual © - All Rights Reserved 2026